You are configuring a network to support voice to the PSTN. One important aspect to the configuration is to be able to determine the individual slot, subunit, and port number from the gateway endpoint identifier. Which signaling protocol is appropriate for this situation?
A. H.323
B. SIP
C. SCCP
D. MGCP
Answer: D
642-437 Exam Dumps
300-135 BrainDumps
Cisco Exams Questions Dumps
Thursday, 14 July 2016
Friday, 10 June 2016
Pass4sure 642-437 Question Answer
Which two statements are true regarding SCCP? (Choose two.)
A. SCCP requires each endpoint or gateway event to be communicated to Cisco Unified Communications Manager.
B. Endpoints can operate autonomously if communication with Cisco Unified Communications Manager is lost.
C. SCCP may interoperate with H.323 endpoints if it is implemented with Cisco Unified Communications Manager.
D. Endpoints and gateways maintain the dial plan. E. SCCP uses hex messages for communication.
Answer: A, C
A. SCCP requires each endpoint or gateway event to be communicated to Cisco Unified Communications Manager.
B. Endpoints can operate autonomously if communication with Cisco Unified Communications Manager is lost.
C. SCCP may interoperate with H.323 endpoints if it is implemented with Cisco Unified Communications Manager.
D. Endpoints and gateways maintain the dial plan. E. SCCP uses hex messages for communication.
Answer: A, C
Wednesday, 6 April 2016
Pass4sure 642-437 Question Answer
Refer to the exhibit. An administrator is migrating a PBX telephony system to a VoIP solution using a fixed numbering plan. The extension numbers and PSTN DIDs cannot be changed. Which of the following methods can be used in order to reach the individual extensions at Site B when called via the PSTN?
A. The administrator can replace the last three digits of the DID with xxx to cover the individual extensions. B. The administrator can replace the last three digits of the DID with xxx and use translation rules to map the individual extensions.
C. The administrator needs to implement an auto-attendant solution where individual extensions can be dialed.
D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules.
Answer: D
A. The administrator can replace the last three digits of the DID with xxx to cover the individual extensions. B. The administrator can replace the last three digits of the DID with xxx and use translation rules to map the individual extensions.
C. The administrator needs to implement an auto-attendant solution where individual extensions can be dialed.
D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules.
Answer: D
Friday, 29 January 2016
Pass4sure 642-437 Question Answer
Refer to the exhibit. An administrator is migrating a PBX telephony system to an IP Phone solution using a fixed numbering plan. The extension numbers and PSTN DIDs cannot be changed. Which of the following methods can be used in order to reach the individual extensions at Site B when called via the PSTN?
A. The administrator can add a 1 to the DID for Site B to become 300-555-31xxx.
B. The administrator needs to map the last four digits in the DID to the extension numbers and prefix a site code.
C. The administrator needs to map the last four digits in the DID to the extension numbers and prefix an intersite code.
D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules. E. No changes are necessary because PSTN calls are preceded with access code 9.
Answer: D
Which of the following best describes the implementation challenges that are associated with variable-length numbering plans?
A. the variable number of extensions that need to be implemented
B. the number of trunks that need to be assigned
C. the mapping between IP addresses and extension numbers
D. the identification of the number of digits that need to be dialed before the call is routed
E. the degree in which the dial plan varies
Answer: D
B. The administrator needs to map the last four digits in the DID to the extension numbers and prefix a site code.
C. The administrator needs to map the last four digits in the DID to the extension numbers and prefix an intersite code.
D. The administrator needs to map the last four digits in the DID to the extension numbers using translation rules. E. No changes are necessary because PSTN calls are preceded with access code 9.
Answer: D
Which of the following best describes the implementation challenges that are associated with variable-length numbering plans?
A. the variable number of extensions that need to be implemented
B. the number of trunks that need to be assigned
C. the mapping between IP addresses and extension numbers
D. the identification of the number of digits that need to be dialed before the call is routed
E. the degree in which the dial plan varies
Answer: D
Monday, 28 December 2015
Pass4sure 642-437 Question Answer
Refer to the exhibit.
Cisco Unified Communications Manager Express has been partially configured to support 6 IP phones and 12 directory numbers. The Cisco Unified Communications Manager Express will use the IP address 10.1.130.1/24. Which two elements of the configuration are missing from the command output and need to be added so that phones do not auto-register, but can manually register with Cisco Unified Communications Manager Express? (Choose two.)
A. ip address 10.1.130.1
B. no reg-ephone
C. create profile
D. ip source-address 10.1.130.1
E. create cnf-files
F. no auto-reg-ephone
Answer: D, F
Which three functions are associated with MGCP? (Choose three.)
A. Control is implemented by a series of plain-text commands that are sent over UDP port 2427 between Cisco Unified Communications Manager and the gateway.
B. A PRI backhaul channel forwards PRI Layer 2 (Q.921) signaling information via a TCP connection from the gateway to the call agent.
C. MGCP uses a separate channel for backhauling signaling information between the call agent and the gateway.
D. The gateway maintains a separate dial plan for redundancy in case the call agent fails.
E. Users query the call agent to determine the location of the call recipient.
F. A call agent uses control messages to direct its gateways and their operational behavior.
Answer: A, C, F
A. ip address 10.1.130.1
B. no reg-ephone
C. create profile
D. ip source-address 10.1.130.1
E. create cnf-files
F. no auto-reg-ephone
Answer: D, F
Which three functions are associated with MGCP? (Choose three.)
A. Control is implemented by a series of plain-text commands that are sent over UDP port 2427 between Cisco Unified Communications Manager and the gateway.
B. A PRI backhaul channel forwards PRI Layer 2 (Q.921) signaling information via a TCP connection from the gateway to the call agent.
C. MGCP uses a separate channel for backhauling signaling information between the call agent and the gateway.
D. The gateway maintains a separate dial plan for redundancy in case the call agent fails.
E. Users query the call agent to determine the location of the call recipient.
F. A call agent uses control messages to direct its gateways and their operational behavior.
Answer: A, C, F
Tuesday, 8 December 2015
Pass4sure 642-437 Question Answer
The administrator has added a new ephone-dn and a new ephone to the Cisco Unified Communications Manager Express system, but the new phone will not register with the system. If other phones are operating properly, which of the following should the administrator do first to try to resolve the issue?
A. Reboot the router.
B. Remove the ephone, then re-add the ephone.
C. Verify that the url authentication is configured for the correct authentication URL.
D. Verify that the url services is configured to the correct URL for services.
E. Enter the command no telephony-service, then enter telephony service in global configuration mode.
F. Enter the command no create cnf-files, then enter create cnf-files under the telephony-service configuration.
Answer: F
A. Reboot the router.
B. Remove the ephone, then re-add the ephone.
C. Verify that the url authentication is configured for the correct authentication URL.
D. Verify that the url services is configured to the correct URL for services.
E. Enter the command no telephony-service, then enter telephony service in global configuration mode.
F. Enter the command no create cnf-files, then enter create cnf-files under the telephony-service configuration.
Answer: F
Tuesday, 24 November 2015
Pass4sure 642-437 Question Answer
In which situation would an administrator configure telephony services, but not configure any individual ephones?
A. Phones that are controlled by Cisco Unified Communications Manager Express
B. Cisco Unified Communications Manager SRST fallback
C. Cisco Unified Communications Manager Express with HSRP
D. Remotely located phones that are controlled by a third-party PBX
E. This is not a valid scenario. Ephones are always required.
Answer: B
Which type of ephone-dn is configured for the two ephones that are shown?
A. Phones that are controlled by Cisco Unified Communications Manager Express
B. Cisco Unified Communications Manager SRST fallback
C. Cisco Unified Communications Manager Express with HSRP
D. Remotely located phones that are controlled by a third-party PBX
E. This is not a valid scenario. Ephones are always required.
Answer: B
Which type of ephone-dn is configured for the two ephones that are shown?
A. single-line-octo
B. hunt line
C. shared-line, nonexclusive
D. two directory numbers with one telephone number
E. shared-line, overlay F. octo-line
Answer: E
B. hunt line
C. shared-line, nonexclusive
D. two directory numbers with one telephone number
E. shared-line, overlay F. octo-line
Answer: E
Subscribe to:
Comments (Atom)